Highest Power USB Charger True 4.8 Amps Dual Plug Socket Waterproof Snapover Cap

Description

Integrated high quality socket with 4.8 amp USB dual accessory charger mounting sealing washer and sealing cap.
Highest power in the industry. Chargers your USB accessories up to 30% faster.
Waterproof panel installation.
Ships from the USA.
This listing is for one USB dual charger socket with weatherproof cap. Attaches to your 12 volt source and allows you to charge USB accessories. No LED to draw down your battery. #P#
The socket body is a heavy nylon with all nickel plated parts. The weatherproof cap fits into and snaps over the front of the charger to keep moisture out when not in use. The rubber mounting washer allows for a vibration resistant and waterproof installation. The socket has 0.250 male spade type terminals for easy wire connections.
This charger is rated for 4.8 amps at 5 vdc ( 5 amp peak) and can accept two USB devices.
The socket fits in a 1-1/8” hole in panels up to 1-1/2 inch thick with just the backing nut and in panels of unlimited thickness by placing the rectangular compression plate over the front of the socket and securing it with two screws.
Higher volume discounts available for 10 or more contact us.
Options:
-Add a USB plug connector boot. This is a vinyl boot that slips over your USB cable connector such that when the connector is inserted into the socket the boot covers the connection from weather. See item 110966193186
-Add a socket boot to increase the weather resistance of the socket. The boot covers the the wire contacts and has an exit for the wires. The socket boot may be purchase one per assembly when you buy this item. For a straight boot (shown above but not included in this listing) see this listing 120941435675. For a right angle boot for tight installations see this listing
110791911918
.
-Add a fuse holder to your socket installation. Always connect the socket to your battery with a fuse in between. This listing is for an inline waterproof fuse holder and a 15 amp ATO fuse. See listing 110968445581
-Add a rubber occlusive sealing socket washer. Makes an extra waterproof seal when mounting the socket against a panel. The washer goes between the socket flange or nut, and the panel to seal the assembly. See listing
301066433426
-Add wires with a fused 60 inch (5ft) wire harness to your socket assembly.
The harness comes with of a fuse holder and fuse, and red and black wire connectors to attach to your socket and battery.
See
121264213736
-Add a double mounting plate. Allows you to mount two socket products side by side for a professional installation. See listing
121267652997
-Extended warranty. This product comes with a one year warranty for damage during normal use. Just return it for repair or replace. If you want to extend the basic warranty period to three years, buy this option
301125941663
-Add a socket switch waterproof-Single pole single throw (SPST). Rubber switch cover and sealed back fits in a socket hole. Wire crimp connections. See
121422944323.
-Add mounting plate black screws. Allows you to mount your socket with plate in a panel of unlimited thickness. See
121435313871
-Add a mounting hole bore. Allows you to drill or enlarge a hole in your panel or dash to mount this product. See
121486220109.
-FREE FREE FREE domestic shipping on these options when you buy the item in this product listing. Just buy this listing and the options you need at the same time. Then send us a message after, to combine shipping and we will refund your shipping for the options. Applies to one of each select option only when purchased together.
-Add a Magic Socket Mounting Plate Stainless Steel Washer Assembly- with the Magic Washer the socket mounts in front of the plate and is held in place with the socket nut so the assembly becomes unified. Now the assembly is free standing and may be mounted as a free standing panel in any size opening. Buy 121555660699
.
-Add a heavy paper, actual size mounting plate, drilling template set to your purchase. Allows you to position the location of the holes that need to be drilled for your installation. See
121581701935
.
-
Add a four hole quad mounting plate. Allows you to construct a custom square panel/ dashboard of four socket elements; switch, alarm, voltmeter, USB charger and special socket type. See
121644713148.
-Add a custom label or marker. A label frame fits around the front flange face and allows you insert a labeled tag. See #
121742656759
-External surface mount. Allows for mounting this product either under or over a surface or dashboard. #
301807948007